8L-RR-X-Movitec V 04/02

Brass peripheral pump with 0.7kw, 230-1-50 motor suitable for cold fill pressures up to 6 bar.

Factory fitted low water/safefill kit allows for system filling and guards against dryrunning 4litre break tank, ball valve with 50mm air gap and 3/4" overflow. 8 litre, 10 bar,

expansion vessel and safety valve.

Electronic pressurization controller with illuminated status display and a common fault relay actuating on high pressure/low pressure/sensor error.

Transducer pressure sensing.

Low water level float switch.

The above components are mounted on a mild steel baseplate, with a stainless steel, vertical multistage, glanded system pump with 0.37 kW,400-3-50 motor and c/w isolating valves.

The system pump will give a duty of: 0.7 l/s @ 130 kPa"

We have added an additional 40kPa to cover for basic connections and minimal pipework connecting the 2 coils.

Please note - if there the run round system may require additional allowances for Pressure Drops it is your responsibility to advise of this and we can size a pump to suit the system.

We would require the following information to check suitability: total pipework length, gradient, bends (and quantities), pipe bore and material of the pipeline.

Delivery:  Est 4 week lead time Subject to Prior Sale and confirmation at the time of order.

Price includes delivery to UK mainland address, excludes offloading.

Failed deliveries to specified addresses may be chargeable.

Validity: 30 Days from date of quotation

Whilst we have done everything in our power to ensure our quotation meets the original specification, we cannot guarantee that modifications have not been made to the pump or part since being supplied.

Therefore we respectfully request that you check the technical details of the offer, in particular, the orientation, pattern and rating of the flanges, impeller trims, speed selection etc to ensure our offer matches your requirements. It is therefore the responsibility of the purchaser to ensure that all requirements are met.

We can only accept an order when the recipient advises in writing at the time of order placement that goods can and will be received at the given delivery point.