Dampers
Damper H 0610mm x W 0690mm Depth 120mm - Assembled By Others - Spindles - 1
DAMPER_H610_W690_S1_OTHR
The ABBCO range of duct volume control dampers has been designed to give exacting control through air handling systems. Low profile aluminium aerofoil blades ensure good aerodynamic characteristics for quiet operation and minimum pressure drops. All blades incorporate an edge seal to give an ‘air seal’ performance as standard. Blades are interlocking and operate through a nylon geared drive which can be used with manual, electric or pneumatic controls.
£199.62 excl vat
Damper H 0610mm x W 0690mm Depth 120mm - Epoxy Coated - Assembled By Others - Spindles - 1
EPOXY_DAMPER_H610_W690_S1_OTHR
The ABBCO range of duct volume control dampers has been designed to give exacting control through air handling systems. Low profile aluminium aerofoil blades ensure good aerodynamic characteristics for quiet operation and minimum pressure drops. All blades incorporate an edge seal to give an ‘air seal’ performance as standard. Blades are interlocking and operate through a nylon geared drive which can be used with manual, electric or pneumatic controls.
£236.20 excl vat
Damper H 0610mm x W 0690mm Depth 120mm - Epoxy Coated - Pre Assembled - Spindles - 1
EPOXY_DAMPER_H610_W690_S1_PRE
The ABBCO range of duct volume control dampers has been designed to give exacting control through air handling systems. Low profile aluminium aerofoil blades ensure good aerodynamic characteristics for quiet operation and minimum pressure drops. All blades incorporate an edge seal to give an ‘air seal’ performance as standard. Blades are interlocking and operate through a nylon geared drive which can be used with manual, electric or pneumatic controls.
£334.20 excl vat
Damper H 0610mm x W 0700mm Depth 120mm - Epoxy Coated - Pre Assembled - Spindles - 1
EPOXY_DAMPER_H610_W700_S1_PRE
The ABBCO range of duct volume control dampers has been designed to give exacting control through air handling systems. Low profile aluminium aerofoil blades ensure good aerodynamic characteristics for quiet operation and minimum pressure drops. All blades incorporate an edge seal to give an ‘air seal’ performance as standard. Blades are interlocking and operate through a nylon geared drive which can be used with manual, electric or pneumatic controls.
£334.99 excl vat
Damper H 0610mm x W 0999mm Depth 120mm - Epoxy Coated - Pre Assembled - Spindles - 1
EPOXY_DAMPER_H610_W999_S1_PRE
The ABBCO range of duct volume control dampers has been designed to give exacting control through air handling systems. Low profile aluminium aerofoil blades ensure good aerodynamic characteristics for quiet operation and minimum pressure drops. All blades incorporate an edge seal to give an ‘air seal’ performance as standard. Blades are interlocking and operate through a nylon geared drive which can be used with manual, electric or pneumatic controls.
£390.39 excl vat
Damper H 0610mm x W 1200mm Depth 120mm - Pre Assembled - Spindles - 1
DAMPER_H610_W1200_S1_PRE
The ABBCO range of duct volume control dampers has been designed to give exacting control through air handling systems. Low profile aluminium aerofoil blades ensure good aerodynamic characteristics for quiet operation and minimum pressure drops. All blades incorporate an edge seal to give an ‘air seal’ performance as standard. Blades are interlocking and operate through a nylon geared drive which can be used with manual, electric or pneumatic controls.
£367.62 excl vat
Damper H 0610mm x W 2000mm Depth 120mm - Assembled By Others - Spindles - 1
DAMPER_H610_W2000_S1_OTHR
The ABBCO range of duct volume control dampers has been designed to give exacting control through air handling systems. Low profile aluminium aerofoil blades ensure good aerodynamic characteristics for quiet operation and minimum pressure drops. All blades incorporate an edge seal to give an ‘air seal’ performance as standard. Blades are interlocking and operate through a nylon geared drive which can be used with manual, electric or pneumatic controls.
£533.62 excl vat
Damper H 0610mm x W 2100mm Depth 120mm - Epoxy Coated - Assembled By Others - Spindles - 2
EPOXY_DAMPER_H610_W2100_S2_OTHR
The ABBCO range of duct volume control dampers has been designed to give exacting control through air handling systems. Low profile aluminium aerofoil blades ensure good aerodynamic characteristics for quiet operation and minimum pressure drops. All blades incorporate an edge seal to give an ‘air seal’ performance as standard. Blades are interlocking and operate through a nylon geared drive which can be used with manual, electric or pneumatic controls.
£650.94 excl vat
Damper H 0650mm x W 0690mm Depth 120mm - Assembled By Others - Spindles - 1
DAMPER_H650_W690_S1_OTHR
The ABBCO range of duct volume control dampers has been designed to give exacting control through air handling systems. Low profile aluminium aerofoil blades ensure good aerodynamic characteristics for quiet operation and minimum pressure drops. All blades incorporate an edge seal to give an ‘air seal’ performance as standard. Blades are interlocking and operate through a nylon geared drive which can be used with manual, electric or pneumatic controls.
£199.62 excl vat
Damper H 0650mm x W 0700mm Depth 120mm - Assembled By Others - Spindles - 1
DAMPER_H650_W700_S1_OTHR
The ABBCO range of duct volume control dampers has been designed to give exacting control through air handling systems. Low profile aluminium aerofoil blades ensure good aerodynamic characteristics for quiet operation and minimum pressure drops. All blades incorporate an edge seal to give an ‘air seal’ performance as standard. Blades are interlocking and operate through a nylon geared drive which can be used with manual, electric or pneumatic controls.
£199.62 excl vat
Techincal Information:
Low profile 100mm wide interlocking aluminium aerofoil blades ensure good aerodynamic characteristics for quiet operation and minimum pressure drops.
All blades incorporate an edge seal to give an air seal performance as standard.
Blades are interlocking and operate through a nylon geared drive which can be used with manual, electric or pneumatic control.
The frame work is fabricated from an extruded aluminium section square or rectangular with 40mm flanged connections to accept proprietary duct flanges or fixed within the AHU casing.
All dampers are supplied with a single square extended drive spindle as standard for connection to an electric or pneumatic controller. For manual control an optional hand locking quadrant can be fitted.
For damper sizes larger than 2000mm wide x 1200mm high multiple damper assemblies will be provided. All multiple arrangements require more than one control
|
Follow us
Payment Methods
